How to deal with the low purification temperature in the operating room is very important. Once the temperature is out of control, it will bring great inconvenience, which will lead to the operation room purification system can not work normally. In the process of use, the general condition is constant temperature, but we still can't rule out that the temperature is too high or too low. How do we deal with it.

　　1. When this kind of fault occurs, we should observe whether the temperature setting of the control panel in the operating room is low. If the setting value is low, adjust the setting value appropriately. The temperature of the purification operating room is generally set at 22-25 ℃. If the set value is adjusted and operated for a period of time, the panel temperature does not change. At this time, we should go to the computer room to check whether the heating system works normally Abnormal operation of the thermal system, the primary reason is that the overheat protection part of the control system acts, or the main circuit trips, and so on. At this time, we will deal with it and remove the fault.

　　2. If the temperature setting value and display value of the control panel in the purification operating room are within the normal range, and the heating system operates normally, but the temperature in the operating room is still low, then the most likely reason is that the temperature sensor is aging, the detection value is inconsistent with the actual value in practice, and the error is too large. At this time, the fault can be eliminated by replacing the temperature sensor. When the temperature is high, the method is similar. In summer, we can also use the above ideas to eliminate the related problems of refrigeration system.

　　Source: Jiangmen operating room equipment manufacturer http://www.gdguanghe.com/